Support
WebsiteDiscordOverviewTechnical Docs
  • Support Docs have moved
  • Get support
  • Known issues
    • Bluetooth PIN request on Android
    • Bluetooth pairing guide
  • DIMO Data Devices
    • Device installation instructions
    • Hardware FAQ
    • eBay Policy
    • DIMO Shop Shipping
  • Software Connection
    • Smartcar connection
  • Wallet & Token
    • Using the native wallet
    • Using a Rainbow or Metamask Wallet
      • Connect your wallet to DIMO Mobile
      • View $DIMO in wallet
      • View your VehicleID in your wallet
      • Check your wallets for smooth pairing
      • Adding Polygon and Switching Networks
      • Remove WalletConnect session on Trust Wallet
        • Import web3 address into Rainbow
        • Import web3 address into MetaMask
    • Moving $DIMO between Ethereum & Polygon
    • Retrieving your wallet public address
    • Compromised accounts
  • How To
    • Add a vehicle
    • Connect to SmartCar
    • Delete a vehicle
    • Delete an integration
    • Share your car with someone
    • Add a DIMO Device after connecting with Smartcar
    • Claim your Alpha Fleet NFT
    • Reading Error Codes with DIMO Mobile
    • How to transfer your Vehicle to a new account
    • Check for connectivity issues
  • FAQ
    • DIMO basics
    • Compatibility
    • DIMO Device Installation
    • Moving a DIMO Device
    • Mobile app
    • Privacy
  • 📖Discord Rules
    • Discord Rules
Powered by GitBook
On this page
  • Before you Start: 🚨Warnings and ⚠️Key Info
  • Getting Help from a Person
  • Warnings
  • Other things to Know
  • Step 1: Check the Contents of Your Package
  • Step 2: Watch the Installation Video
  • Step 3: Install the Device and Pair in the DIMO Mobile App
  • 3.1: Locate Your OBD2 Port
  • 3.2: Select a Device Location with your Extension Cable
  • Good Mounting Examples
  • Poor Mounting Examples
  • 3.3: Pairing Process in the DIMO Mobile app.
  • Step 4: Get going!
  1. DIMO Data Devices

Device installation instructions

Let's get your car connected!

PreviousBluetooth pairing guideNextHardware FAQ

Last updated 2 years ago

Before you Start: 🚨Warnings and ⚠️Key Info

Getting Help from a Person

  • Run into problems? Email support@dimo.zone or come to Discord.

  • Weekly Onboarding - 5pm ET in Discord:

  • Do you want to book a time to speak with someone? .

Warnings

  • You're early! The install process may not be perfect and there may be some kinks to iron out.

  • Do not put this device on an airbag panel.

  • Do not install the device on your dash

Other things to Know

  • Complete Syncing can take 24-48 hrs. It can take a little time for the DIMO device to download any updates, sync with the wireless network, and fully configure itself with the DIMO protocol.

  • How the AutoPi Operates. Once the AutoPi is plugged in it will power on/off automatically. The device automatically hibernates at 12.4 volts, and shuts off at 12.3 volts to protect your battery. It will update its own software automatically when we push new updates.

  • Lights on the AutoPi. The lights on the AutoPi may stay on or flash when you shut your vehicle off, but this will not kill your battery. It’s just temporary and the AutoPi will hibernate.

  • Unusual Occurrences. If you notice anything unusual after plugging in your device like a check engine light, we want to hear from you. Between AutoPi and DIMO, there are thousands of devices in the field, and we're confident this will not impact your vehicle operations, but we can help troubleshoot and make sure everything is normal and alarms clear.

  • What cars can connect? We only support vehicles 10 years old and newer.

✅ All good? Let's get going!

Step 1: Check the Contents of Your Package

In the box you should have received the following items:

  • DIMO Miner SIM card is already installed and active)

  • OBD2 extension cord for the DIMO Miner to find a comfortable mounting position

  • Alcohol swab for cleaning the area that you will mount your device)

  • Velcro / 3M Adhesive Tape for mounting the device to a safe space in your car)

  • Informational card with QR codes that link to: (1) the DIMO Mobile App and (2) these instructions here

  • DIMO Stickers just for fun!

To see what the contents of your box should look like, click here:

If you think anything is broken, defective or missing, please email support@dimo.zone. We can help you evaluate and if necessary get you a packing/return slip, as this will not be included in the package.

✅ If everything looks good, let's move on to the next step!

Step 2: Watch the Installation Video

Full Installation Overview Video

Pairing Process Recording

✅ Got all that? You can read through it all below:

Step 3: Install the Device and Pair in the DIMO Mobile App

3.1: Locate Your OBD2 Port

3.2: Select a Device Location with your Extension Cable

You may want to complete the process of mounting the device until after the completing the pairing as you will need to be able to scan the barcode and check the lights on the device.

After locating your OBD2 port, you may want to sit in the drivers seat to find your ideal mounting location.

We recommended the following options for places to install your DIMO Device. It's up to you where you would like to place it:

Click the pictures to see them full size.

  • Attach to vehicle trim below steering column

  • Route under the floor mat and store in rear seat pocket

  • Store inside vehicle trim (may require some removal/replacement)

Plugging in your DIMO device directly to your OBD2 may result in a loose connection. This may cause issues with data accuracy, engine lights, or detachment from the OBD2 port. We recommend you use an extension cable. If the one supplied is not a suitable length, you can order an OBD2 cable of a different length on many sites, including Amazon.

You can come back here after the Mobile App Pairing Process. Once you have found your ideal location for mounting, wipe the area down with the included alcohol wipe. Attach the included Velcro or 3M tape to the device. Attach one end of the extension cable to the device and then plug in the other side into your OBD-2 port. Mount the device to your vehicle.

Good Mounting Examples

Poor Mounting Examples

3.3: Pairing Process in the DIMO Mobile app.

3.3.1) Create an Account and Add Your Car

  • Tell us about your vehicle! Type in the make and model of your vehicle and select it from the drop down list. You will now select the year of your vehicle and click the Add vehicle button! Select connect with a DIMO miner. Now we can start pairing!

  • Your phone has stable internet connection via Wi-Fi or cell service.

  • You have access to the vehicle that you want to use your hardware with.

  • (optional) A working camera on your mobile device

  • If you do not have a working camera or you cannot get the barcode to scan you can input the device ID manually in the app

3.3.2) Pair Your Device

  • Plug in your DIMO Miner into the OBD-II port in your vehicle and start your vehicles ignition.

  • Wait for your device to power on and show both a solid green and blue light.

Your vehicle may show as pending in your app. You may have to drive for it to say connected.

Green light won't stay solid?

The DIMO Miner connects via 4G cell service and configures itself for your vehicle. This can awhile to connect if you are in an area with poor cell coverage. You may need to drive somewhere for a stronger connection. A solid green light means it has connected

Step 4: Get going!

Congratulations! You have just paired your first DIMO device. You have taken your first step in owning your data. You can learn more about rewards here. You can learn more about how your data can be used here. You can learn how to claim your NFT here.

How the device works. We won't cover that here, but if you'd like to learn more, .

This specialized data port is usually under the dashboard below the steering wheel, but you may find it in a few other locations depending on your car. Refer to this picture for areas on where the port might be: (click to expand) The port may be hard to find in some vehicles, but you should see a trapezoid shape with two rows of pins that looks like this: (click to expand)

If your port is hard to find. you can click for help.

You can download the IOS app and the Android app .

If you already have an account and have added your car, click here to jump to .

Open the DIMO Mobile app on your iPhone or Android device and create an account. If you create an account with your email address, you can add a crypto wallet later.

Welcome to the DIMO app, you will now be on the home screen, You will need to add your first vehicle here. Let's hit the + add a vehicle button. Read the Acknowledgement and hit the button!

Verify you have all of the following before continuing.

Tap your vehicle in your home screen, and select connect with a DIMO miner

Add in your vehicle's 17 character VIN and click “Enter”. Click for help finding your VIN

Locate the barcode on the left side of your DIMO device, and select "Scan my barcode" in the mobile app.

Scan the barcode on your device, if successful you will see a checkmark in your app.

Once you have verified both lights are on and solid select “I’m plugged in” to continue.

Your device is connected! Your DIMO miner is fully configured. You'll now see your data show in your mobile app

click here
here
here
here
https://dimo.zone/events/
Book a time
READ: Before you Start
Step 1: Check the Contents of Your Package
Step 2: Watch the Installation Video
Step 3: Install the Device and Pair in the DIMO Mobile App
Step 4: Get going!
Locate Your OBD2 Port
Select a Device Location with your Extension Cable
Follow the Pairing Process in the DIMO Mobile app
3.3.2 Pair your Device
here
ALD
VINDO
VALR
Boomer
Wallnutter
Tech404
ShaoFunk
TigerRaiders
Cable obstruction
Device Obstruction