Signals
Definition
The Signals resource is an aggregation of detailed signal fields.
Arguments
tokenId
from
to
interval
filter
Hierarchy and Relations
timestamp
Timestamp of the aggregated data.
chassisAxleRow1WheelLeftTirePressure
Tire pressure of the front left tire in kilo-Pascal.
chassisAxleRow1WheelRightTirePressure
Tire pressure of the front right tire in kilo-Pascal.
chassisAxleRow2WheelLeftTirePressure
Tire pressure of the rear left tire in kilo-Pascal.
chassisAxleRow2WheelRightTirePressure
Tire pressure of the rear right tire in kilo-Pascal.
currentLocationAltitude
Current altitude relative to WGS 84 reference ellipsoid, as measured at the position of GNSS receiver antenna.
currentLocationLatitude
Current latitude of vehicle in WGS 84 geodetic coordinates, as measured at the position of GNSS receiver antenna.
currentLocationLongitude
Current longitude of vehicle in WGS 84 geodetic coordinates, as measured at the position of GNSS receiver antenna.
dimoAftermarketHDOP
Horizontal dilution of precision of GPS.
dimoAftermarketNSAT
Number of sync satellites for GPS.
dimoAftermarketSSID
Service Set Identifier for the wifi.
dimoAftermarketWPAState
Indicate the current wpa state for the devices wifi.
exteriorAirTemperature
Air temperature outside the vehicle.
lowVoltageBatteryCurrentVoltage
Current Voltage of the low voltage battery.
obdBarometricPressure
PID 33 - Barometric pressure.
obdEngineLoad
PID 04 - Engine load in percent - 0 = no load, 100 = full load.
obdIntakeTemp
PID 0F - Intake temperature.
obdRunTime
PID 1F - Engine run time.
obdDTCList
List of currently active DTCs formatted according OBD II (SAE-J2012DA_201812) standard ([P|C|B|U]XXXXX )
powertrainCombustionEngineECT
Engine coolant temperature.
powertrainCombustionEngineEngineOilLevel
Engine oil level.
powertrainCombustionEngineMAF
Grams of air drawn into engine per second.
powertrainCombustionEngineSpeed
Engine speed measured as rotations per minute (rpm).
powertrainCombustionEngineTPS
Current throttle position in %, from 0 to 100.
powertrainFuelSystemRelativeLevel
Current available fuel in the fuel tank in %, from 0 to 100.
powertrainFuelSystemSupportedFuelTypes
High level information of fuel types supported.
powertrainRange
Remaining range in meters using all energy sources available in the vehicle.
powertrainTractionBatteryChargingChargeCurrentAC
Current AC charging current (rms) at inlet. Negative if returning energy to grid. Used when per-phase numbers are unavailable.
powertrainTractionBatteryChargingChargeLimit
Target charge limit (state of charge) for battery in %, from 0 to 100.
powertrainTractionBatteryChargingChargeVoltageUnknownType
Current charging voltage at inlet. Used when the data source does not indicate the current type (AC or DC) in use.
powertrainTractionBatteryChargingIsCharging
True if charging is ongoing. Charging is considered to be ongoing if energy is flowing from charger to vehicle.
powertrainTractionBatteryCurrentPower
Current electrical energy flowing in/out of battery. Positive = Energy flowing in to battery, e.g. during charging. Negative = Energy flowing out of battery, e.g. during driving.
powertrainTractionBatteryGrossCapacity
Gross capacity of the battery.
powertrainTractionBatteryStateOfChargeCurrent
Physical state of charge of the high voltage battery, relative to net capacity in %, from 0 to 100. This is not necessarily the state of charge being displayed to the customer.
powertrainTransmissionTravelledDistance
Odometer reading in kilometers, total distance travelled during the lifetime of the transmission.
powertrainType
Defines the powertrain type of the vehicle.
speed
Vehicle speed in km/hr.
cabinDoorRow1DriverSideIsOpen
True = Fully or partially open. False = Fully closed.
cabinDoorRow1DriverSideWindowIsOpen
True = Fully or partially open. False = Fully closed.
cabinDoorRow1PassengerSideIsOpen
True = Fully or partially open. False = Fully closed.
cabinDoorRow1PassengerSideWindowIsOpen
True = Fully or partially open. False = Fully closed.
cabinDoorRow2DriverSideIsOpen
True = Fully or partially open. False = Fully closed.
cabinDoorRow2DriverSideWindowIsOpen
True = Fully or partially open. False = Fully closed.
cabinDoorRow2PassengerSideIsOpen
True = Fully or partially open. False = Fully closed.
cabinDoorRow2PassengerSideWindowIsOpen
True = Fully or partially open. False = Fully closed.
Last updated
Was this helpful?