Device installation instructions
Let's get your car connected!
Before you Start: 🚨Warnings and ⚠️Key Info
Getting Help from a Person
Run into problems? Email support@dimo.zone or come to Discord.
Weekly Onboarding - 5pm ET in Discord: https://dimo.zone/events/
Do you want to book a time to speak with someone? Book a time.
Warnings
You're early! The install process may not be perfect and there may be some kinks to iron out.
Do not put this device on an airbag panel.
Do not install the device on your dash
Other things to Know
Complete Syncing can take 24-48 hrs. It can take a little time for the DIMO device to download any updates, sync with the wireless network, and fully configure itself with the DIMO protocol.
How the AutoPi Operates. Once the AutoPi is plugged in it will power on/off automatically. The device automatically hibernates at 12.4 volts, and shuts off at 12.3 volts to protect your battery. It will update its own software automatically when we push new updates.
Lights on the AutoPi. The lights on the AutoPi may stay on or flash when you shut your vehicle off, but this will not kill your battery. It’s just temporary and the AutoPi will hibernate.
Unusual Occurrences. If you notice anything unusual after plugging in your device like a check engine light, we want to hear from you. Between AutoPi and DIMO, there are thousands of devices in the field, and we're confident this will not impact your vehicle operations, but we can help troubleshoot and make sure everything is normal and alarms clear.
How the device works. We won't cover that here, but if you'd like to learn more, click here.
What cars can connect? We only support vehicles 10 years old and newer.
✅ All good? Let's get going!
Step 1: Check the Contents of Your Package
In the box you should have received the following items:
DIMO Miner SIM card is already installed and active)
OBD2 extension cord for the DIMO Miner to find a comfortable mounting position
Alcohol swab for cleaning the area that you will mount your device)
Velcro / 3M Adhesive Tape for mounting the device to a safe space in your car)
Informational card with QR codes that link to: (1) the DIMO Mobile App and (2) these instructions here
DIMO Stickers just for fun!
If you think anything is broken, defective or missing, please email support@dimo.zone. We can help you evaluate and if necessary get you a packing/return slip, as this will not be included in the package.
✅ If everything looks good, let's move on to the next step!
Step 2: Watch the Installation Video
Full Installation Overview Video
Pairing Process Recording
✅ Got all that? You can read through it all below:
Step 3: Install the Device and Pair in the DIMO Mobile App
3.1: Locate Your OBD2 Port
If your port is hard to find. you can click here for help.
3.2: Select a Device Location with your Extension Cable
You may want to complete the process of mounting the device until after the completing the pairing as you will need to be able to scan the barcode and check the lights on the device.
After locating your OBD2 port, you may want to sit in the drivers seat to find your ideal mounting location.
We recommended the following options for places to install your DIMO Device. It's up to you where you would like to place it:
Click the pictures to see them full size.
Attach to vehicle trim below steering column
Route under the floor mat and store in rear seat pocket
Store inside vehicle trim (may require some removal/replacement)
Plugging in your DIMO device directly to your OBD2 may result in a loose connection. This may cause issues with data accuracy, engine lights, or detachment from the OBD2 port. We recommend you use an extension cable. If the one supplied is not a suitable length, you can order an OBD2 cable of a different length on many sites, including Amazon.
You can come back here after the Mobile App Pairing Process. Once you have found your ideal location for mounting, wipe the area down with the included alcohol wipe. Attach the included Velcro or 3M tape to the device. Attach one end of the extension cable to the device and then plug in the other side into your OBD-2 port. Mount the device to your vehicle.
Good Mounting Examples
Poor Mounting Examples
3.3: Pairing Process in the DIMO Mobile app.
3.3.1) Create an Account and Add Your Car
If you already have an account and have added your car, click here to jump to 3.3.2 Pair your Device.
Tell us about your vehicle! Type in the make and model of your vehicle and select it from the drop down list. You will now select the year of your vehicle and click the Add vehicle button! Select connect with a DIMO miner. Now we can start pairing!
Your phone has stable internet connection via Wi-Fi or cell service.
You have access to the vehicle that you want to use your hardware with.
(optional) A working camera on your mobile device
If you do not have a working camera or you cannot get the barcode to scan you can input the device ID manually in the app
3.3.2) Pair Your Device
Plug in your DIMO Miner into the OBD-II port in your vehicle and start your vehicles ignition.
Wait for your device to power on and show both a solid green and blue light.
Your vehicle may show as pending in your app. You may have to drive for it to say connected.
Green light won't stay solid?
The DIMO Miner connects via 4G cell service and configures itself for your vehicle. This can awhile to connect if you are in an area with poor cell coverage. You may need to drive somewhere for a stronger connection. A solid green light means it has connected
Step 4: Get going!
Congratulations! You have just paired your first DIMO device. You have taken your first step in owning your data. You can learn more about rewards here. You can learn more about how your data can be used here. You can learn how to claim your NFT here.
Last updated